TomUK
As above, please find a small modern tmd layout,
Due to not much room this layout fits onto 6x2 board,
Main purpose is to service as maintanance and re fuel for clas 37's 60's maybe one 66. Class 08 also around to deal with arrival of tanker to top up fuel depot.
Comments welcome, but also starting point for others who have limit space for a layout
ps Peco SL code 100 used, layout will use DCC
peartree
I haven't even looked at your layout yet, but I think I detect the normal sour attitude of those of us with far too little space for our dreams :) . Remember that you can complete your 2 x 6, then put that one in storage and start another 2 x 6 that connects up with one end of the original.
TomUK
If required i could house a much larger layout but to be honest, while searching the web for ideas of what sort of layout to design, I got most excited by a small busy depot scene, rather than say a large oval with loco's going round and round.
Also small layout designs were far and few between to find on the net so thought hopefully by posting this would show what can be done in a small space, but also hopefully a smaller design should mean less cost, quicker to complete and more time to enjoy. :)
Andy
Hi,
Have you viewed this website?
http://www.carendt.com/
Andrew
peartree
Ok, that's a valid outlook on things :) By the way, I looked at the layout, finally, and discovered that it was designed using Hornby track. Is that right or are you going to use Peco, as you originally posted?
TomUK
Well spotted, I forgot i'd popped in hornby flex track. :-\
Peco ref was to the points used.
peartree
I played around a little with the layout segment you posted and found that there's something to be said for including a pair of loops at the ends and dropping the staging yard underneath the main layout. Admittedly, if you're trying to keep space use to a minimum, you'll have to make do with a single-ended yard, to keep the tracks reasonably long, but that's a minor point. One thing that I would do immediately would be to extend the two sidings just below the right-hand lead to the 'fiddle tracks'. Even with European goods vans, they are a shade too short (I feel) to be useful.
TomUK
Layout updated slighty, and coloured in.
peartree
But you still have the issue with the track to the right of the turnout on the "Loop around" section. I don't know your loco classes, but it seems awfully short to hold an engine, much less any wagons. Or does it connect through to part of the fiddle yard? It's a little hard to tell.
Chris
Hi Jeff. 6 inches is plenty long enough for a small diesel shunter. The wagons would be parked on the upper loop around tracks while the shunter runs round it and then push them into the refuelling facility. However, I am concerned that there are three tracks that extend beyond the end of the board. What does worry me is the number of times the locos have to switch back and forth to get into teh yard. In effect there are two head shunts instead of the one that I would expect. I have attached a very crude modified layout addressing this and adding an extra track to tyeh fiddle yard.
peartree
And the turnout (on the upper edge) that has a leg that doesn't connect to anything? :)
In either case, part of the reason for the layout is to supply maximum shunting interest, I would say.
@Tom- I'd like to see the entire layout some time, if it's not too much trouble. We might have something to suggest.
Chris
Hi Jeff.
I just needed a curve and used a point to supply it as I have rather too much work to do recovering my computer to hunt out the rail types and identify the right curve. I should have said that in my message. The change was to make entry to the TMD (what does that stand for?) more natural and enable Tom to hide, say, a loco and a short train of tank wagons at the same time. If anything, I would suggest that it would add more interest to the layout without detracting from the shunting on the scenic part and, should he ever decide to exhibit it, more interest to the viewer.
All the best,
Chris.
TomUK
Hi Chris,
Thanks for your constructive comment ( layout variation )
your right as the R600 at the end of the loop will only be used for a class 08 shunter, making it able to loop around wagons. Also the area of track at the top right, i will attach an extra bit of board to cover that.
Most trains entering the layout will have no wagons in toe, therefore they will just navigate their way to the depot, re fuel etc. as required.
There will be a need for the delivery of fuel, this will simply see a train with two 100 tons tankers in toe enter from off scene area, class 08 can then shunt these tankers back onto track below off scene and straight into siding.
I also thought that the depot could take delivery by rail, items require to maintain the loco's.
Therefore, as before train would arrive from off scene, with two or more van wagons ( 147mm ).
again 08 would shunt them back and head into the main area off layout, but to beable to shunt them into depot area without trapping its self, 08 needs to get other end hence loop around.
I've flirted with the idea that trains with could arrive with freight that is not for the depot ( seacow hopper 2 or 3, and maybe even a 2 car mail train) where this freight would just be stored as the loco fuels up etc then heads on its way. Also have planned siding lengths to accept the arrival of hornby 75 ton crane.
Hope this clears up my view of how the layout would operate.
With regards to your layout variation. I have set mine out in such away so that maximum train length can be held off scene, and when it arrives.
Longest train possible would be Class 66 with two mail cars ( although i would never pair them up )
28cm + ( 23.6cm x 2 ) = 75.2cm off scene/ entry track = 77cm/78cm
tight I know but possible
cheers
TomUK
P.S
I believe it stands for Traction Maintanence Depot
Chris
Thanks Tom.
You can see now why just seeing a layout is not enough. You also have to know what use it is to be put. If you are going to be off-loading and reloading all teh time in the fiddle yard, make sure you have lenty of finger space round it. On my layout, it is impossible to make up a train on the hidden sidings track one due to the proximity of the back of the scenery. This is not too much of a problem as I can make up a train one one of tracks 2, 3 or 4 and then shunt it, or run it round to track 1. So the only time I have problems is if a long train hits the rear buffers and derails or a viewer bashes into the exhibit (as happened at my first exhibition while I was away to lunch - poor guy looking after it took pretty well the whole lunch hour trying to get all the trains back on the tracks).
Good luck. It's not my type of interest but I hope you get a lot of enjoyment out of it.
Chris
peartree
Tom,
I know that you've got this lot pretty well set in your mind, but do me a favor and take a quick look at something I whipped up. The included file Has the modified layout at top and the original at the bottom. All I did was to smooth out a couple of things, replacing 'Y' turnouts with regular ones (pretty much). I think the result looks better and gives you a touch more 'room to roam', as it were.
TomUK
Hi
Thanks for your alt version Jeff, looks better with all the qinks ironed out with straighter points, I think looking at this I went away and had a fiddle and almost came back to your version. Things like broken fridge freezer etc has taken its toll on train funds so still a lomg way off my layout, but i'll still dream.
here's what I will keep on file and build one day
peartree
Tom,
Yes, it looks a lot better. While you're waiting on funds, take the time to put that design off in a corner and start over totally. Then do it another dozen times. I know that might sound batty on first read, but that's the whole point of having AnyRail- trying out alternatives without having to build them. You may come up with something you never thought of, initially. And Winter, of course, is the perfect time to do it! :)