Hi Guys,
This is my first post so be gentle! Over the Christmas period I added insulation to our loft. This involved clearing lots of rubbish and finding some old track and trains from probably 30 years ago. Dewy eyed, my Dad suggested that we attempt to build a "train set" in the loft. I think we can do better than that!
Although this is not my primary hobby (as guessed from my username!) I am more than happy to help, and have spent many lunch hours cruising the internet for knowledge and inspiration. The more I find out, the more interested I have become, and would like to make a good job of this project.
I have measured the area we have available and attached a template. The layout consists of a main area of 12ft x 6ft. Additionally, there is 5’9” x 4’ to the right, 5’9” x 2’ to the left and 6’ x 12” at the bottom. There is free access at the top of the layout, and limited access at the sides. Entry to the loft is through a hatch in the floor. All control will be conducted from this hatch area.
So far we have agreed that the primary stock will be steam; I favour Bachmann’s era 3, up to 1947. Also, the scale will be “00”. Naturally, with an area this large it is tempting to fill it with track, but I am finding this is not necessarily the best approach. I am also finding it hard to get away from big loops around the outside. So I have come to a dead end; just where do I start?
Operation is to be conducted by a minimum of 1 person, so my Dad can play anytime he likes. I have no problem learning computer control so we can set routes etc. and just watch. I am completely open to ideas and there are probably areas I have not though of that will have an influence on the layout.
Any ideas? Thanks.