Well, I think I have pretty much everything here. I have calculated out the measurements for 15° curves from the 30° curve measurements, and since all the accessory tracks are the same 5 in straight tracks, the only thing not directly accounted for are the switch tracks. The switch tracks could be created by merging a 10 in straight and 19/20 in radius 30 deg curve together.
For convenience I am also attaching an image of a switch track from MTH just to see how the roadbed is handled by S-Helper/MTH. You can see a slight notch where the 19 in radius curve sticks out from the 10 in straight. I confirmed this with a measurement of the 19 in radius curve which measures to 10-1/8in straight length at the Outer Edge (OE).
If these are measurements you can work with, this should allow for a complete set of the new MTH line. I just don't have measurements for how far the switch flag roadbed sticks out. If you wanted to represent it, I would rough it as protruding 1-1/2 in starting at the edge of the track for 1-3/4 in length (based on track ties).

