Jody wrote
Seems I have a number of different sizes of switches and wyes, like to use as few different sizes as possible.
Jody
PS. Any suggestions on how to break this monster into manageable sections? For ease of transport I think 30" x 60" should be about maximum for size.
greetings Jody and welcome to AR and the Forum
one suggestion is to not be overly attempting to model exactly the 1:1 prototype in your trackplan.
what i mean is this:
there are NRMA standards and rules of thumb that come with the scale you are modelling (as it is in all scales).
the things to know and keep in mind are these
--minimum center track to center track distance between parallel track for both straight (which is less) and curved (which depends on the radius)
--you can get a trackplan that closely follows a prototype using the turnouts and center to center distance that would seem to match exactly to a mapped image (like the one you are using)
--you can get a trackplan that still follows the prototype using turnouts and center to center distance that meets with standards and rules of thumb but is slightly different than the 1:1 image
suggestion would be to use #6 turnouts or larger on mainline and #4 or larger on yard and industrial (that could be all 6's and 4's following that rule of thumb)
suggestion would also be to see where you might use a left turnout instead of a right, and vice versa, or perhaps a "Y" or even a double slip switch if needed.
suggestion would also be to set parallel tracks (in N Scale?) at 1.25" (atlas' spacing) or 1.375" (kato's spacing)
suggestion would lastly be to compromise # of tracks that can be used to keep the flavor but fit into the space you wish to define as the footprint of your module.
these suggestions are being shared without a close study of your plan (i am having difficulty due to a recent injury) but are things that i would think that most of us usually consider when refining a trackplan.
i hope something here is of help...
sincerely
gary