martin8rice@aol.com
Hi, a little background.....I've been tinkering with model railways for many years but have only recently decided to try and build an 'N' gauge/scale DCC layout using Kato Unitrack.
With this in mind over the last year or so I have gathered together the following sets:
M1, V1, V2, V6 and V7, which in the end gave me a double oval with passing place, a double crossover and a viaduct set which I didn't like so removed the plastic 'walls'.
Its true what the americans seem to think in that some of us (me definitely included) tend to build race tracks (ovals) and not railroads and try as I might I cannot get round this.
My aim is for a scenic layout with at least 2 loco's running as main/branchlines with a bit of shunting/shuffling if possible on a baseboard of 36" x 84" (Door size). I intend to use 1" foam sheets to build the various heights so as with my attached plan, the dogbone can be 2" or more above the maintrack (which I cannot seem to get to join at bottom left? The era doen't matter too much as I run what I like and enjoy both steam and diesel both British and US.
So is there anyone out there who can give me some sage guidance and advice as to what I should be aiming for please! Thanks Martin (Scotland, UK)
RhB_HJ
Hi Martin, welcome to AR.
KATO track, hmmm ... that could be interesting, again. :)
peartree
Welcome to the forums, Martin. You have just had your first lesson in modern model railroading: Generally speaking, Kato track isn't worth much for a serious layout. There's no flex track and if there ever was a layout that went together WITHOUT a section that won't join up as designed, we (collectively) have never heard of it :). The good news is that unless the distance to be closed is over half an inch, it will probably all come together, if you wiggle it right.
Now, you've got a fair collection of Kato track. As you may have discovered by now is that AnyRail has all the track parts on hand, but nothing that tells the rest of us what pieces are in what sets. If you intend to stick to Unitrack, and need us to perhaps hand you a track plan, then please take an inventory of exactly what you've got and give us a list. It may be that we can come up with something a little better than a race track. We may not fit much on a door, but we'll give it a try.
BritsTukker
Not having worked in N-scale myself, what is it about Kato Unitrack that makes people who are just starting up go out and buy truck loads of the stuff without first trying it out ??? ?
With your exisitng layout, you can get that last track to connect just by increasing the tolerance on the 'settings' tab. I think Jeff's right - with the parts on your current layout you don't have enough points (turnouts) to do what you've stated as your aim, so I suggest you post that list asap.
Cheers.
RhB_HJ
BT
It's the advertising that does it; it's snaps together, works reliably, the geometry is pretty good, but incomplete.
I used to teach a night course for the schoolboard back East: "Model Railroading - The Basics". That prevented people from going out and buying loads of stuff. Sorted out a lot of stuff in the "common beginner's pitfall" department.
The most important recommendations: pick up the MRR mags at the library and read, read, read. If you're a club person join one of the local MRR clubs - of course I didn't mention that it gives one a chance to screw up on some other guys layout (if it's a round robin club). ;D ;D ;D
martin8rice@aol.com
Hi Britstucker, well....I guess that having been brought up with 'hornby' Trainsets and the associated trackwork, Unitrack seemed like a reasonable 'Platform' :P as it seems to be well made and have reliable joins, and having seen the results when the track is carefully ballasted etc it works. However, having in the past used Peco flexi-track, I found it to look unrealistic in that the sleepers were at the wrong angles at times and needed a lot of work to look right. Also my local model shop was well impressed (well...so they said!)
I just guess that my brains not agile enough to work out a decent trackplan :'(
regards
chaz
Martin,
Welcome to the group and don't give up on Unitrack. I'm not sure what the "serious modeler" comment means.
First, there are a lot of interesting layouts that don't use flex track. I've attached a stretched verson of John Allen's Gorre and Daphetid. It's a twice around with three levels. The stretch is a little to much for my taste. The blue is at 0" elevation. The yellow is at 3" elevation. The red is at 5" elevation.
HJ just added a very interesting "L" shaped, double mainline that I can't find now or I would point you to it.
Second, even without flex track, you can
ALWAYS close a Unitrack loop when you learn how to use the variable length 20050 straight. It extends to any length between 78mm to 108mm.
And now to your question...it helps is you can give us some more information. It's all in the details. One of our favorite questions is "How does your railroad make money?"
Chaz
chaz
Martin,
Just a technical point about using the 20220 and 20221 turnouts. Each of those turnouts comes with 2, 60mm long straight pieces with the roadbed cut away at one end. These pieces are AnyRail numbers S60L and S60R. You don't have to use them, but it you don't, you will have to cut the roadbed back on whatever you do use. Note that the 20202 and 20203 turnouts don't require them.
If you replace the 62mm straights in the bottom most siding, with these 60mm straights, you will find the bottom most siding will connect perfectly.
I will admit, that there are some tricks to using Unitrack...but that's why we are here.
Chaz
glakedylan
welcome Martin to the AR forums
i use unitrak for the Christmas layout around the tree and the appeal is its flawless joining together and performance. never had a derail on it in 7 years.
i suppose that dependability is its appeal and why folks like to use it, as costly as it is. i hope you are able to find a track plan that offers what you seek.
if you are not aware, there was a recent uni-trak design in MR mag. which you can search at their website. i recall what made the plan work was an adjustable straight piece that you can extend to various lengths.
also, there are connect to other track sections you can use to attached uni-trak to, say, atlas code 80 with corkroadbed underneath. that provides for the ability to incorporate flex track and less expensive turnouts that function fairly well.
best of everything to you and your plans!
peace,
Gary L Lake Dillensnyder
RhB_HJ
First suggestion, with a lot of left-over track and three extra pieces (in red)

peartree
@chaz- "I'm not sure what the "serious modeler" comment means." It means that while Kato is fine at Christmas (as noted), it is fairly hard to produce a layout that works as good as it looks and is easy to build. Figuring out just where to stick which bits from their pallette of track is seldom a snap.
@Gary- Yes, there was a series of articles on how to build a decent Unitrack layout. Unfortunately, while small in general terms it was about twice the size in square centimeters of the one that Martin wants to build. Not to mention which, it's not always easy to find a full crew of professional layout builders to help you over the rough spots.
@Martin- There are drawbacks to every method of building a model railroad EXCEPT paying someone else to do it for you (providing you're rich enough) :). Still, there are significant reasons why experienced model railroaders seldom work with Unitrack. One of them is that it's tough to get flowing curves and realistic-looking trackwork out of something that doesn't bend. Then another one that locks you into code 80 track. Not fatal, but many people are moving on to code 55, since it looks so much more realistic. I could go on, but we've been through this stuff in the forums before. We do our best to help out as much as possible.
RhB_HJ
Jeff,
Humour ON
You should get yourself a harp!
Humour OFF
Title of thread "Struggling for ideas with Unitrack"
Same basic track arrangement with two more turnouts and sidings. A few structures added. Plenty of room in the center of the door to add a town/village scene. What needs to be added are the roads that lead off layout to suggest "the rest of the world".
BTW one day I'll have to find out why people buy those double crossovers for a small layout. ??? ???

peartree
But HJ, he wants to run a couple of trains at one time. That would call for some fancy footwork on your layout...
RhB_HJ
One runs in circles, the other does the switching. That's two trains running. The way the wharf and the industries are set-up it will be planty of challenge to get those switched and keep out of the way of the roundy-rounder. Not quite a switching puzzle but close.
RhB_HJ
Just for fun I tossed that &^%* double crossover and added corresponding turnouts that will do "some good". Naturally since it's an oval I have no idea where the "plausibility" went. ;D ;D
That's it from my end!

peartree
I would be happier if you gave him some kind of staging, even though it would have to be hidden somewhere. There's room on a door for a decent amount of railroad, but Kato track is rather, ahem, inflexible... :) Of course the real good done is that Martin can look at all the track plans already in the forums and get some more ideas.
Hey, maybe the people on eBay like Kato Unitrack? Hmm...
RhB_HJ
Hidden staging? Are you serious? All one needs is a "tack on" board and then the trains come from somewhere and go somewhere. While you're still thinking about it I made the modifications.

Mike from CT
Has anyone looked at the Kato site for ideas?
http://www.katousa.com/track-plans/n-plans.html
None the precise size, but some look easily expandable....
martin8rice@aol.com
@chaz, thanks for the suggested layout and tips...you say that a railroad must earn its keep. To tie in with what I'd like, perhaps a continuous passenger through line and as I want scenic in 3d, how about lumber, whereas cutting/loading is carried out on the forested hillsides,then taken away onto second continuous track, disappearing under the usual tunnel or bridge or to a river for barge transport.
Maybe that's too much for both Kato and a HCD.
If not, I do like the layout you have shown.
Thanks to you others for your advice and suggestions, please keep them coming.
Regards Martin
Ps. Not so easy to get MRR here in the Far North of Scotland. ;-(
peartree
@Martin- Don't ignore that you can subscribe and get it all online. While not ideal, it's better than not being able to read it when you want to. The limitation in your layout is purely the HCD. Tracks take up room and you probably don't want a layout that is nothing but track. Don't hang up the plow yet, though, we're still kicking this around. The layout has to last you longer than a few days and the planning deserves no less.
@Mike- "Has anyone looked at the Kato site for ideas?" -yes, but there was nothing there about how to dispose of a large quantity of Kato track :( :D. However, they may be prejudiced...
@HJ- At least show a little zing, HJ. Turn that staging 90 degrees CCW, get a wiggle in the middle as it crosses a creek and throw in a few buildings from the edge of a small village, plus the lumber yard. Extend the main line to the end of the stub and it becomes an interchange track- lumber out and general freight / empties back in.
Here's my take on that. It requires a little expansion because of the need of a curve, but it's not a huge expansion.