First, take a look at the attached AnyRail layout.
The image is from Google Earth. To see the tracks better, UN CHECK Lines and Surfaces. To see the image better, UN CHECK Visible Track. The image contains a fairly long BNSF train, heading empty to the coal fields around Sheridan, Wyoming. To say the least, this is a very nasty reverse curve.
It's not to scale, but it's not far off.
The technique to make this image into an AnyRail track plan, is pretty simple.
1. Using Google Earth, find an interesting set of tracks. I left some of the text in the image, because I don't know how to get rid of it. Help on this would be appreciated.
2. Using the Google Earth RULER tool, measure and record the height of the image. We will use this height later. Make sure you know what the units are.
3. Save the image to a file.
4. Open a new layout in Anyrail.
5. Create a 4 sided Surface. It doesn't have to be square, or the right size.
6. Select the SURFACE and using LOAD IMAGE, import the image from the file you just created.
7. Select the SURFACE and make sure MAINTAIN ASPECT RATIO is checked.
8. Press ADJUST OUTLINE. Note that the surface squared up and the image fills the surface.
9. Calculate the scale height of the image by dividing the height of the Google Earth image by the scale. I work in N, so I divide by 160. In addition, you will have to account for any change in units.
10. Select the SURFACE and change the HEIGHT to the scale value you just calculated.
11. Press ADJUST OUTLINE. The image is now to scale.
12. Change the SETTINGS Width and Depth to create a work space that can contain the entire SURFACE.
13. Select the SURFACE and move it into the work area.
14. Lay track. I used N PECO Streamline Code 80 Flex.
I wanted the tracks to be 33mm apart, so I kept changing the SURFACE Height followed by ADJUST OUTLINE until the image of the tracks was approximately 33mm apart. Actually, it wasn't too far off of the true scale image.
Thanks David...for all your help on this and creating a totally cool program.